Skip to main content
Filter
Date range
Location
Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Please Note: This course is now being held at our new Drummond Street Campus located at 41 Drummond St, Chadstone. CPCCWHS1001 Prepare to work safely in the construction industry. This is an initial induction course to allow access to construction sites where a site specific induction is carried out. This course provides participants with the skills and knowledge to work safely in the construction industry and allows them to meet the requirements of introductory safety training. The course requires that participants demonstrate personal awareness and understanding of Health and Safety legislative requirements, communication and reporting processes, common construction hazards and risk control measures and the basic incident and emergency procedures. Upon successful completion of the required assessment, participants will then be issued with a Construction Induction Card from WorkSafe which will be applied for on their behalf by Holmesglen. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Managers and supervisors have considerable responsibilities and duties in regards to occupational health and safety. This program has been developed to provide an overview of the knowledge and skills required to prevent workplace injuries and to manage a safe workplace. It studies leadership safety duties and responsibilities under the Act. It aims to assist participants to perform their roles and meet compliance in regards to OHS issues by studying strategies to ensure a safe workplace. Ultimately safer workplaces are more productive workplaces. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

Managers and supervisors have considerable responsibilities and duties in regards to occupational health and safety. This program has been developed to provide an overview of the knowledge and skills required to prevent workplace injuries and to manage a safe workplace. It studies leadership safety duties and responsibilities under the Act. It aims to assist participants to perform their roles and meet compliance in regards to OHS issues by studying strategies to ensure a safe workplace. Ultimately safer workplaces are more productive workplaces. Group bookings of 10 or more can be offered at a discounted daily rate at your location.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 08/04/2019 and concluding on 12/04/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will every Thursday commencing on the 09/05/2019 and concluding on 06/06/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 03/06/2019 and concluding on 07/06/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 15/07/2019 and concluding on 19/07/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 12/08/2019 and concluding on 16/08/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will every Tuesday commencing on the 27/08/2019 and concluding on 24/09/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 30/09/2019 and concluding on 04/10/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will every Wednesday commencing on the 02/10/2019 and concluding on 30/10/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 28/10/2019 and concluding on 01/11/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will every Wednesday commencing on the 20/11/2019 and concluding on 18/12/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe course is designed to enable Health and Safety Representatives (HSR's) to understand and effectively exercise their powers and entitlements under the OHS Act 2004. Managers and Supervisors may also find this course beneficial. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to take the WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Holmesglen is approved to deliver the WorkSafe HSR Initial OHS training course. A certificate will be issued upon completion of the course. Please note: This course will run Monday to Friday commencing on the 02/12/2019 and concluding on 06/12/2019. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses. Please note: The course commencement is subject to minimum participant numbers. We will confirm the running of this course via email closer to the course commencement date.

This WorkSafe approved HSR Refresher course is an opportunity to revisit aspects of the HSR Initial OHS Training Course and refresh their knowledge of the learning outcomes below. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to undertake WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses.

This WorkSafe approved HSR Refresher course is an opportunity to revisit aspects of the HSR Initial OHS Training Course and refresh their knowledge of the learning outcomes below. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to undertake WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses.

This WorkSafe approved HSR Refresher course is an opportunity to revisit aspects of the HSR Initial OHS Training Course and refresh their knowledge of the learning outcomes below. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to undertake WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses.

This WorkSafe approved HSR Refresher course is an opportunity to revisit aspects of the HSR Initial OHS Training Course and refresh their knowledge of the learning outcomes below. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to undertake WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses.

This WorkSafe approved HSR Refresher course is an opportunity to revisit aspects of the HSR Initial OHS Training Course and refresh their knowledge of the learning outcomes below. It should be noted as per Section 67 of the 2004 OHS Act all elected HSR's are entitled to undertake WorkSafe Victoria approved OHS training for HSR's and choose their training course in consultation with their employer. Group bookings of 10 or more can be offered at a discounted daily rate at your location or at one of our other campuses.

Technology students and teachers are likely to be using a range of equipment and machines that, by their nature, present a higher risk than other areas of the curriculum. This listing is for the full accredited course 22454VIC in Safe Use of Machinery for Technology Teaching. The Occupational Health and Safety Regulations 2007 (Part 3.5 - Plant) require employers to identify and control risks associated with machinery and plant in the workplace. The School Principal is responsible for ensuring that the relevant safety precautions for operating machinery in the school are implemented and that teachers have had the appropriate training and have attained the required levels of competency in machinery and plant. This course is confined to instructions in the safe use of operating machinery in a technology teaching environment in schools.

Technology students and teachers are likely to be using a range of equipment and machines that, by their nature, present a higher risk than other areas of the curriculum. This listing is for the full accredited course 22454VIC in Safe Use of Machinery for Technology Teaching. The Occupational Health and Safety Regulations 2007 (Part 3.5 - Plant) require employers to identify and control risks associated with machinery and plant in the workplace. The School Principal is responsible for ensuring that the relevant safety precautions for operating machinery in the school are implemented and that teachers have had the appropriate training and have attained the required levels of competency in machinery and plant. This course is confined to instructions in the safe use of operating machinery in a technology teaching environment in schools.

Technology students and teachers are likely to be using a range of equipment and machines that, by their nature, present a higher risk than other areas of the curriculum. This listing is for the full accredited course 22454VIC in Safe Use of Machinery for Technology Teaching. The Occupational Health and Safety Regulations 2007 (Part 3.5 - Plant) require employers to identify and control risks associated with machinery and plant in the workplace. The School Principal is responsible for ensuring that the relevant safety precautions for operating machinery in the school are implemented and that teachers have had the appropriate training and have attained the required levels of competency in machinery and plant. This course is confined to instructions in the safe use of operating machinery in a technology teaching environment in schools.

Technology students and teachers are likely to be using a range of equipment and machines that, by their nature, present a higher risk than other areas of the curriculum. This listing is for the full accredited course 22454VIC in Safe Use of Machinery for Technology Teaching. The Occupational Health and Safety Regulations 2007 (Part 3.5 - Plant) require employers to identify and control risks associated with machinery and plant in the workplace. The School Principal is responsible for ensuring that the relevant safety precautions for operating machinery in the school are implemented and that teachers have had the appropriate training and have attained the required levels of competency in machinery and plant. This course is confined to instructions in the safe use of operating machinery in a technology teaching environment in schools.

Technology students and teachers are likely to be using a range of equipment and machines that, by their nature, present a higher risk than other areas of the curriculum. This listing is for the full accredited course 22454VIC in Safe Use of Machinery for Technology Teaching. The Occupational Health and Safety Regulations 2007 (Part 3.5 - Plant) require employers to identify and control risks associated with machinery and plant in the workplace. The School Principal is responsible for ensuring that the relevant safety precautions for operating machinery in the school are implemented and that teachers have had the appropriate training and have attained the required levels of competency in machinery and plant. This course is confined to instructions in the safe use of operating machinery in a technology teaching environment in schools.

Technology students and teachers are likely to be using a range of equipment and machines that, by their nature, present a higher risk than other areas of the curriculum. This listing is for the full accredited course 22454VIC in Safe Use of Machinery for Technology Teaching. The Occupational Health and Safety Regulations 2007 (Part 3.5 - Plant) require employers to identify and control risks associated with machinery and plant in the workplace. The School Principal is responsible for ensuring that the relevant safety precautions for operating machinery in the school are implemented and that teachers have had the appropriate training and have attained the required levels of competency in machinery and plant. This course is confined to instructions in the safe use of operating machinery in a technology teaching environment in schools.

OHS and Industrial Skills Course Areas