Overview
The Certificate III in Flooring Technology (Resilient) specialising in vinyl installation provides comprehensive training, delivered both on and off the job, to ensure you develop the most up-to-date knowledge and skills required to become a professional floor covering installer.
Career opportunities, include:
- vinyl layer
- floor finisher
Pathways to further study:
- CPC40120 Certificate IV in Building and Construction
- CPC50220 Diploma of Building and Construction (Building)
Watch our virtual tour
Take a tour of our flooring centre
Studying the Certificate III in Flooring Technology (Resilient) at Holmesglen
You will become proficient at installing vinyl flooring. Flooring technology will see you working in both domestic and commercial sites, and on renovation projects.
Holmesglen has been training flooring technology apprentices for more than 15 years. Training is delivered in our specially designed facilities, with a focus on hands-on, practical training.
Course structure
Units
View units
| Unit code |
Name |
| MSMSUP102 |
Communicate in the workplace |
| MSMSUP106 |
Work in a team |
| TLID2003 |
Handle dangerous goods/hazardous substances |
| MSFGN3001 |
Read and interpret work documents |
| MSFFL3053 |
Establish and maintain a safe flooring technology work environment |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the construction industry |
| MSFFL2030 |
Receive and prepare flooring materials |
| MSFFL3054 |
Assess flooring installation sites |
| MSFFL2034 |
Prepare subfloors with cementitious coating applications |
| MSFFL2032 |
Select, prepare and apply moisture barriers to concrete subfloors |
| MSFGN2001 |
Make measurements and calculations |
| MSFFL3052 |
Plan and cost flooring technology work |
| MSFFL3100 |
Apply densifiers and sealers to concrete surfaces |
| MSFFL2033 |
Install hard underlays |
| MSFFL3065 |
Install resilient tiles |
| MSFFL3069 |
Install rubber floor coverings |
| MSFFL3070 |
Install resilient sheet to walls |
| MSFFL2038 |
Install lay flat vinyl floor coverings |
| CPCCWP3002A |
Apply waterproofing process to internal wet areas |
| MSFFL3071 |
Install anti-static and conductive resilient floor coverings |
| MSFFL3066 |
Install linoleum floor coverings |
| MSFFL3067 |
Complete large scale and complex vinyl flooring installations |
| MSFFL3068 |
Install resilient floor coverings using custom designs and decorative finishes |
| Code | Name |
|---|
| MSMSUP102 | Communicate in the workplace |
| MSMSUP106 | Work in a team |
| TLID2003 | Handle dangerous goods/hazardous substances |
| MSFGN3001 | Read and interpret work documents |
| MSFFL3053 | Establish and maintain a safe flooring technology work environment |
| CPCCWHS1001 | Prepare to work safely in the construction industry |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
| MSFFL2030 | Receive and prepare flooring materials |
| MSFFL3054 | Assess flooring installation sites |
| MSFFL2034 | Prepare subfloors with cementitious coating applications |
| MSFFL2032 | Select, prepare and apply moisture barriers to concrete subfloors |
| MSFGN2001 | Make measurements and calculations |
| MSFFL3052 | Plan and cost flooring technology work |
| MSFFL3100 | Apply densifiers and sealers to concrete surfaces |
| MSFFL2033 | Install hard underlays |
| MSFFL3065 | Install resilient tiles |
| MSFFL3069 | Install rubber floor coverings |
| MSFFL3070 | Install resilient sheet to walls |
| MSFFL2038 | Install lay flat vinyl floor coverings |
| CPCCWP3002A | Apply waterproofing process to internal wet areas |
| MSFFL3071 | Install anti-static and conductive resilient floor coverings |
| MSFFL3066 | Install linoleum floor coverings |
| MSFFL3067 | Complete large scale and complex vinyl flooring installations |
| MSFFL3068 | Install resilient floor coverings using custom designs and decorative finishes |
Assessment
Assessments are designed to provide learners with opportunities to demonstrate they have attained the required skills and knowledge using a range of practically based activities and tasks, as required by recognised standards.
Entry requirements
As this is an apprenticeship, you must have a training agreement with a registered employer from a relevant industry.
Prior to enrolment or commencement of training, applicants are required to complete a literacy and numeracy assessment and a pre-training review. These will assist with determining suitability to the course, verify the training plan and identify any learning support needs.
COVID-19 vaccination requirements
Please refer to our coronavirus update page to view current vaccine requirements.
Recognition of prior learning
You may be able to shorten the length of your chosen course by measuring skills acquired through work, life experiences or qualifications obtained from formal studies or training. AQF qualifications and statements of attainment issued by another registered training organisation will be recognised by Holmesglen. Read more about Recognition of Prior Learning, Credits and Advanced Standing.
Outcomes
Qualification and recognition
On completion you will receive the nationally endorsed MSF30818 Certificate III in Flooring Technology.
How to apply
Apprenticeship
A training contract must be completed by the employer and apprentice within the first two weeks of employment.
An Australian Apprenticeship Support Network representative will visit the workplace to complete the training contract with the employer and the apprentice.
Visit Australian apprenticeships.gov.au or more information.
If you have further questions about your application, please contact the department:
TTD
1300 639 888
appcentral@holmesglen.edu.au
Recruitment
Holmesglen may engage third parties to recruit students on behalf of the institute. Third party recruiters receive a commission and this will not impact on your fees.
Find out more about your rights and obligations as a student and the services we provide at Holmesglen.
Fees
| Tuition fees (GST exempt) |
Cost |
|
| Gov. subsidised Apprenticeship | $2,288 | |
| Concession | $458 | |
| Mandatory Materials and Activities fees * (GST inc) |
|
|
| Materials fee | $0 | |
| Activities fee | $0 | |
**Additional costs may also apply for course consumable and other costs. These may include consumables such as learning resources, personal protective equipment/clothing and other costs such as immunisation costs, National Police Check and Working with Children Check for relevant courses. To view the additional costs that apply for each course, download a full list of estimated additional costs by course (PDF - 102kb).
All fees are indicative only. Your fees will be calculated on your individual circumstances at the time of enrolment. Training is delivered with Victorian and Commonwealth funding. Find out now if you are eligible for Government-subsidised fees or Concession
.