Skip to main content

Overview

Course code:

MEM40105

CRICOS:

093369G

Start date(s):

Various dates throughout the year

Course length:

Full Time: 1.5 years , Part Time: Variable

Campus:

Moorabbin

The Certificate IV in Engineering - Welding Ticket Pathway will provide you with a greater trade base and chance to develop post-trade level skills in welding techniques.

Designed for qualified tradespeople or those experienced in the industry, you will learn intermediate Arc, MIG, TIG welding techniques and advanced skills to become a coded welder. Coded welders earn higher wages than typical metal fabrication tradespersons.

The course prepares you for one or more welding certificates (1-9) as issued by Weld Australia (WA) - formerly known as Welding Technology Institute of Australia.

Completing certain units of study will allow you to obtain the necessary skills to undertake one or more of the Welding Certification exams with WA and to apply your skills immediately in industry as you work towards completing the course.

Read about the Arc Welding - Intermediate and Welders Certification Ticket
Read about the MIG Welding - Intermediate and Welders Certification Ticket
Read about the TIG Welding - Intermediate and Welders Certification Ticket

On completion of MEM40105 Certificate IV in Engineering, you will have gained all the required units of competency to prepare you for theoretical and practical examinations for a Welders Certification Ticket issued by Weld Australia.

You will have enhanced career opportunities in fields associated with fabrication, welding. You will be equipped with the skills to pursue opportunities in the metals industry, post trade and associated areas.

 


Student testimonials

 

The biggest skill I’ve gained while studying at Holmesglen is the rapid rate at which I can take in knowledge and learn new ways of doing things. This is due to the encouragement and support the engineering teachers have given me to push myself.

Axel



The course covers a huge range of topics, all of which allowed me to acquire a range of skills to plan, design and build what it is I might imagine. The best thing is that you get coached how to do things properly.

Matt

 

Course structure

Arc Welding – Intermediate
The following units will give you the skills to do basic arc welding and provide skills in power and hand tools, safe welding practices and engineering measurements, used in the fabrication welding industry:
MEM05012C Perform Routine Manual Metal Arc Welding
MEM18001C Use Hand Tools
MEM18002B Use Power Tools/Hand Held Operations
MEM12023A Perform Engineering Measurements
MEM05051A Select Welding Processes
MEM05052A Apply Safe Welding Practices

Arc Welding – Welders Certification Ticket
Gaining a Weld Australia Certificate No. 1, No. 1E, No. 2, No. 3, No. 3E, and/ or No. 4 in adherence to Australian Standard 1796 will allow you to work as a coded welder using the Manual Metal Arc Welding process.

The following units and the required pre-requisites will prepare you to undertake the Welder’s Certificate exams:

MEM05026C Apply Welding Principles
MEM05016C Perform advanced welding using manual metal arc welding process
MEM05046B Perform welds to code standards using manual metal arc welding process
MEM09002B Interpret technical drawing
MEM05007C Perform manual heating and thermal cutting

MIG Welding - Intermediate
MIG Welding is best for general fabrication of structural steel, because of its speed and ease of use. The following units provide you with knowledge and skills in the MIG welding process, power and hand tools, safe welding practices and engineering measurement used in the fabrication/welding industry.

MEM05050B Perform Routine gas Metal Arc Welding
MEM18001C Use Hand Tools
MEM18002B Use Power Tools/Hand Held Operations
MEM12023A Perform Engineering Measurements
MEM05051A Select Welding Processes
MEM05052A Apply Safe Welding Practices
MEM05017D Weld Using Gas Metal Arc Welding Process

MIG Welding – Welders Certification Ticket
Gaining a Weld Australia Certificate No. 8G in adherence to Australian Standard 1796 will allow you to work using the Gas Metal Arc Welding process.

The following units and the required pre-requisites will prepare you to undertake the Welder’s Certificate exams:

MEM05026C Apply welding principles
MEM05018C Perform advanced welding using gas metal arc welding process
MEM05043B Perform welds to code standards using gas metal arc welding process
MEM09002B Interpret technical drawing
MEM05007C Perform manual heating and thermal cutting

TIG Welding - Intermediate
TIG Welding (Tungsten Inert Gas) is one of the most difficult and time consuming of welding processes but excels at stainless, nickel alloys, aluminium and other alloys. It is the choice for strong high quality welds and used in automotive and aircraft manufacture.

These units will give you experience with TIG welding processes, power and hand tools used in the fabrication/welding industry along with safe welding practices and engineering measurements.

MEM05049B Perform Routine Gas Tungsten Arc Welding
MEM18001C Use Hand Tools
MEM18002B Use Power Tools/Hand Held Operations
MEM12023A Perform Engineering Measurements
MEM05051A Select Welding Processes
MEM05052A Apply Safe Welding Practices
MEM05017D Weld Using Gas Tungsten Arc Welding Process

TIG Welding – Welders Certification Ticket
Gaining a Weld Australia Certificate No. 5 and/ or No. 7 in adherence to AS 1796 will allow you to work as a coded welder using the Gas Tungsten Arc Welding process.

MEM05026C Apply welding principles
MEM05020C Perform advanced welding using gas tungsten arc welding process
MEM05044B Perform welds to code standards using gas tungsten arc welding process
MEM09002B Interpret technical drawing
MEM05007C Perform manual heating and thermal cutting

ASSESSMENT

Assessments are designed to provide learners with opportunities to demonstrate they have attained the required skills and knowledge using a range of practically based activities and tasks, as required by recognised standards

SUBJECTS

Code

Name

MEM12023A

Perform engineering measurements

MEM12024A

Perform computations

MEM13014A

Apply principles of occupational health and safety in the work environment

MEM14004A

Plan to undertake a routine task

MEM14005A

Plan a complete activity

MEM15002A

Apply quality systems

MEM15024A

Apply quality procedures

MEM16006A

Organise and communicate information

MEM16007A

Work with others in a manufacturing, engineering or related environment

MEM16008A

Interact with computing technology

MEM17003A

Assist in the provision of on the job training

MSAENV272B

Participate in environmentally sustainable work practices

MEM03001B

Perform manual production assembly

MEM05004C

Perform routine oxy acetylene welding

MEM05005B

Carry out mechanical cutting

MEM05006C

Perform brazing and or silver soldering

MEM05007C

Perform manual heating and thermal cutting

MEM05010C

Apply fabrication, forming and shaping techniques

MEM05012C

Perform routine manual metal arc welding

MEM05013C

Perform manual production welding

MEM05014C

Monitor quality of production welding/fabrications

MEM05015D

Weld using manual metal arc welding process

MEM05016C

Perform Advanced Welding Using Manual Metal Arc Welding Process

MEM05017D

Weld using gas metal arc welding process

MEM05018C

Perform Advanced Welding Using Gas Metal Arc Welding Process

MEM05019D

Weld using gas tungsten arc welding process

MEM05020C

Perform Advanced Welding Using Gas Tungsten Arc Welding Process

MEM05026C

Apply Welding Principles

MEM05037C

Perform geometric development

MEM05043B

Perform Welds To Code Standards Using Gas Metal Arc Welding Process

MEM05044B

Perform Welds To Code Standards Using Gas Tungsten Arc Welding Process

MEM05046B

Perform Welds To Code Standards Using Manual Metal Arc Welding Process

MEM05047B

Weld Using Flux Core Arc Welding Process

MEM05049B

Perform routine gas tungsten arc welding

MEM05050B

Perform routine gas metal arc welding

MEM05051A

Select welding processes

MEM05052A

Apply safe welding practices

MEM07032B

Use workshop machines for basic operations

MEM09002B

Interpret technical drawing

MEM10010B

Install pipework and pipework assemblies

MEM11011B

Undertake manual handling

MEM12007D

Mark off/out structural fabrications and shapes

MEM18001C

Use hand tools

MEM18002B

Use power tools/hand held operations


Entry requirements

RECOGNITION OF PRIOR LEARNING

You may be able to shorten the length of your chosen course by measuring skills acquired through work, life experiences or qualifications obtained from formal studies or training. AQF qualifications and statements of attainment issued by another registered training organisation will be recognised by Holmesglen. Read more about Recognition of Prior Learning, Credits and Advanced Standing.


Outcomes

QUALIFICATION AND RECOGNITION

On completion, you will receive the Certificate IV in Engineering.

PATHWAYS

You may choose to go on to study the MEM50105 Diploma of Engineering – Advanced Trade gaining the opportunity to further progress your skills in design, manufacture and development aspects of engineering.

CAREER OPPORTUNITIES

coded welder


How to apply

APPLY VIA AGENT

Holmesglen recommends international students apply through one of our accredited student recruitment agents. This will assist you in the preparation of all application documents and ensure that you are well counselled on the Australian Government's Genuine Temporary Entrant (GTE) requirements for International students. Further information of the GTE requirements is available at: https://www.homeaffairs.gov.au.

To find out more, visit How to Apply for International Students.

If you have further questions about your application, please contact our International Centre:

T: 03 9564 1703

E: intl@holmesglen.edu.au

RECRUITMENT

Holmesglen may engage third parties to recruit students on behalf of the institute. Third party recruiters receive a commission and this will not impact on your fees.

Find out more about your rights and obligations as a student and the services we provide at Holmesglen.


Fees

Type

Cost

International Fee

$7,300.00


Enquire online

Contact details

Engineering and Fabrication Open Days

Do you love work that is physical and technical? Consider a practical career in the fabrication trades and become an expert in welding engineering. At Holmesglen, we're all about hands on learning, so our fabrication workshops are equipped with industry standard machinery. Our continued investment in equipment means that you learn on the equipment you will find on the job, so when you finish your studies you are work safe and work ready. Visit us on Open Days at 2.30pm and talk to our teachers about a career in Engineering. You will be shown around our workshop and possibly having a try at designing something with our computer controlled plasma machine that you can take home. After the tour our teaching staff will be available to answer any further questions about the courses and the industry. You can also come along to find out more about our VET in Schools course, the Certificate II in Engineering Studies. Our experienced teachers will provide you with information on how we can support you to successfully complete units towards your Year 11 and Year 12 studies as well as highlight future study pathways and career opportunities. Registrations are essential for sessions to go ahead.

- , Thu, 14 Mar - bookings essential.

Holmesglen Moorabbin Campus, 488 South Road Moorabbin 3189 Australia

see all